MTF156QD26A-V1
Microtech
15.6inch
可以
MTF156QD26A-V1 is a color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. This module has a 15.6 inch diagonally measured active area with UHD resolutions (3840 horizontal by 2160 verticalpixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical Stripe and this module can display 8bit+2bit FRC colors. The TFT-LCD panel used for this module is a low reflection and higher color type. Therefore, this module is suitable For Notebook PC. The LED Driver for back-light driving is built in this model. All input signals are eDP interface compatible.
4 lane eDP 1.3 Interface with 5.4Gbps Link Rates
Thin and light weight
8bit+2bit FRC color depth
Single LED Lighting Bar. (Down side/Horizontal Direction)
Data enable signal mode
Side Mounting Frame
Green Product (RoHS & Halogen free product)
On board LED Driving circuit
Low driving voltage and low power consumption
On board EDID chip
HDR400
| Parameter | Specification | Unit | Remarks |
| Active area | 344.2176(H) *193.6224(V) | mm | |
| Number of pixels | 3840(H) x2160(V) | pixels | |
| Pixel pitch | 29.88 x89.64um | um | |
| Pixel arrangement | RGB Vertical stripe | ||
| Display colors | 1074M(8bit+2bit FRC) | ||
| Color gamut | AdobeWO% | ||
| Display mode | Normally black | ||
| Dimensional outline | 350.6576 (H)*205.3724 (V)*2.6(Max) | mm | No PCB side |
| Weight | 280(max) | g | |
| Surface treatment | AG | ||
| Surface hardness | 3H | ||
| Back-light | Bottom edge side, 1-LED lighting bar type | Note 1 | |
| Power consumption | Pd ：1・7 | W | Typ.@ Mosaic pattem@60Hz |
| PBL :7.9 | W | Max | |
| Plolal : 9.6 | W | Max |
25-45 日