参展商

Touch Panel is a human machine interface device combining with electronic display and allowing the operator to interact with the display by touching graphics or texts shown on the screen. Touch Panel is now widely integrated into different kinds of products and appliances such as mobile communication products, household appliance, computer, information terminal equipment, self-service banking system, medical equipment, GPS navigation system.....etc - Electronic design: digitial/matrix, analog resistive, and capacitive - Choices of hard coating, diffused hard coating, and anti-Newton ring for ITO film - Connector type: heat sealed connector and FPC connector

Tempered or toughened glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with normal glass. Tempering puts the outer surfaces into compression and the interior into tension. Such stresses cause the glass, when broken, to crumble into small granular chunks instead of splintering into jagged shards as plate glass (a.k.a. annealed glass) does. The granular chunks are less likely to cause injury.

FPC is a complimentary circuit design to rigid PCB as well as membrane circuit. Given its properties of lightness, flexibility, ductility, thinness, low resistance, fine pitch, good solderability, FPC is best suited for circuit design in compact products. Moreover, the gold plating and the laminated circuitry provide extra protection to the circuitry and thus make the circuitry more resistance to the harsh application environment. - Single side, double side, multi-layer, flexi-rigid FPC available - Choices of gold plating, solder plating and selective plating - SMD service available

Silicone rubber keypad would be the most widely applied input technology ranging from consumer products to medical equipment. Its elasticity nature makes silicone rubber keypad an ideal component for combo keypad solution, which is now found in high end industrial and medical products. - Molded contact pills and printed contact pads - Silk Screen printed and sprayed colors - Hard coating - Epoxy coating - Laser etching for back light - Plastic key cap and IMD panel avaiable

Membrane Switch is a user-friendly electro-mechanical switch with its unique graphic printing on the overlay, made up primarily of laminated PET, in which depression of the contact will turn the circuit on and off. Characterized by its functional stability, material lightness and flexibility, the membrane switch commands good potential to tie in customized PCB installation. Moreover, membrane switch is moisture and heat resistant that meets UL 94 flammability and IP 65. - Selective coloring and texture printing and window opening - Choices of tactile effect: polydome or metal dome - EMI, RFI, and ESD shielding available - Choices of backlight: LED, LED panel, EL and light guide film - SMD components mounted on the circuit - Capacitive Membrane Switch

<ul style="margin-left: 17px;">
	<li>ITO touch panel: matrix, analog resistive</li>
	<li>Infra red touch panel</li>
	<li>Max circuit rating: 5 VDC, 20 mA</li>
	<li>Life expectancy: 100,000 closures</li>
	<li>Actuation force: 10</li>
	<li>100g</li>
</ul>
Order by tailor made each time, so price by negotiation

The touch panels come with heat-sealed connectors&nbsp;or FPC connectors.&nbsp;They are widely applicable&nbsp;to mobile phones, automobile multimedia players, etc. Film-to-film&nbsp;and film-to-glass structures are available for your selection.
<ul>
 <li>Excellent workmanship.</li>
 <li>Linearity: 1.5% or below.</li>
 <li>Electronic design: 4 wires, 5wires, 8 wires.</li>
</ul>

The touch panel features a long life expectancy. It comes with refined finishing for guaranteed performance. This versatile touch panel simply complements your electronic designs in a delightful way.
<ul>
 <li>ITO&nbsp;touch panel: matrix, analog resistive, capacitive.</li>
 <li>Maximum circuit rating: 5 VDC, 20 mA.</li>
 <li>Actuation force: 10-100g.</li>
 <li>Turnkey solution.</li>
</ul>

The keypad is completed with the features of a membrane switch, a silicone rubber keypad, an ITO touch screen, a dome array, as well as PCB and FPC circuitry with mounted components. They are well made with exquisite craftsmanship and attention to details for reliable performance. Complete your electronics with this stylish and sophisticated keypad.
<ul>
 <li>Lasting durability.</li>
 <li>Available in different designs.</li>
 <li>Customers' designs are warmly welcome.</li>
</ul>

The versatile printed circuit board features refined finishing for guaranteed performance. It comes with a polyimide base for exceptional durability. This printed circuit board simply complements your electronic design in a delightful way.
<ul>
 <li>Thickness tolerance: single sided&nbsp;0.005", double sided 0.010".</li>
 <li>Base material: polyimide.</li>
 <li>Copper thickness: 0.5oz, 1oz&nbsp;and 2oz.</li>
 <li>Stiffener material: FR-4, Mylar and polyimide.</li>
 <li>Surface finish: flash gold, selective gold plating, and solder plating.</li>
 <li>Available in flexible&nbsp;and flex-rigid types.</li>
</ul>

Here comes a membrane switch which can be applied to microwave oven panels, air conditioner control panels, TV remote controls, etc. The benefits of membrane switches include ease of cleaning, sealing ability and their low profile. This membrane switch features excellent durability and can stand over 100, 000 closures. 
<ul>
 <li>Insulation resistance: 100M ohm at 100V.</li>
 <li>Actual Force: 50g-400g.</li>
 <li>Switch stroke: 0.1mm-1.5mm.</li>
 <li>Maximum circuit rating: 35VDC, 100mA.</li>
</ul>

<ul style="margin-left:17px;padding-left:0;"><li type="DISC">Thickness tolerence: single sided </li><li type="DISC">0.005" / double sided </li><li type="DISC">0.010"</li><li type="DISC">Base material: polymide &amp; polyester</li><li type="DISC">Copper thickness: 0.5oz, 1oz &amp; 2oz (RA &amp; ED Copper)</li><li type="DISC">Stiffener material: FR-4, Mylar and Polymide</li><li type="DISC">Surface finish: flash gold plating, slective gold plating, and solder plating</li></ul>

This ITO touch panel is an interactive input device integrated in&nbsp;electronic displays. The operator can simply give the instructions by touching the panel. It features excellent durability and can stand over 100, 000 touches. 
<ul>
 <li>ITO touch panel: matrix, analog-resistance.</li>
 <li>Max circuit rating: 5VDC, 20mA.</li>
 <li>Actuation force: 10-100g.</li>
 <li>Turn key solution.</li>
</ul>

The membrane switch is&nbsp;well made with exquisite craftsmanship and attention to details. The stylish design and robust construction make it stand&nbsp;above&nbsp;the rest. This quality membrane switch makes a great option for the assembly of remote control units.
<ul>
 <li>Lasting durability.</li>
 <li>Available in different designs.</li>
</ul>

These flexible PCBs and rigid-flex PCBs are manufactured with an advanced approach considering their intended application and physical attributes. The flexible circuits are&nbsp;finished with durable coating on the connectors of polyimide. With the flash gold plating, selective gold plating, and solder plating on the surface, the PCBs are able to perform even in the harshest environments. 
<ul>
 <li>Thickness tolerance: single-sided–0.005"; double-sided–0.010".</li>
 <li>Base Material: polyimide.</li>
 <li>Copper thickness: 0.5oz, 1oz&nbsp;and 2oz (RA &amp; ED copper).</li>
 <li>Stiffener material: FR-4, mylar and polyimide.</li>
</ul>

展会概览

参展商名单

产品目录

展览厅切面图

成功故事

展会场刊

重要公布

展会资讯

申请展位

参展费用及形式

中小企业市场推广基金

资讯中心

参展资讯

网上预先登记

电子通讯

香港贸发局商贸平台APP及e-Badge

访客规则及法规

请小心处理由第三者提供之推广优惠

参观资讯

显示更多